Repareer je spullen Gemeenschap Winkel

Wijzigingen aan stap #6

Bewerken voor Austin Blakely —

Bewerking goedgekeurd door Austin Blakely

Voor
Na
Ongewijzigd

Stap regels

-[* black] Place your screen into the new shell and attach the two halves; the ribbon cable should slide through the gap like before.
-[* black] Put the top part of the case into place and clip it together. It may have a small gap between the shell, this happens with most aftermarket shells.
-[* black] Reinstall the speaker, buttons, and silicone pads.
+[* black] Place your screen into the new shell and affix the bezel into position; the ribbon cable should slide through the gap like before.
+[* icon_note] The case should click into place so that it stays together even without screws. There also may be a small gap between the top and bottom case, as this common on third party cases.
+[* black] Reinstall the speaker, buttons, and silicone pads into the bottom case.