Wijzigingen in deze stap
Bewerken voor Mohamed Mohamoud —
Bewerking goedgekeurd door Mohamed Mohamoud
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] Step 3-Find the old composer start device | |
| - | [* black] Once you remove the rear panel everything will usually be dusty I highly recommend you remove the dust either with a vacuum or broom. Remove the clip from the top of the compressor start device using the needle nose pillar. |
| + | [* black] After you are done with step 2 make sure to pull the line cord up when removing the rear panels.Once you remove the rear panel everything will usually be dusty. I highly recommend you remove the dust either with a vacuum or broom. Remove the clip from the top of the compressor start device using the needle nose pillar. |