Wijzigingen aan stap #2
Bewerken voor Andrew Karpinski —
Bewerking goedgekeurd door Alex Diaz-Kokaisl
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] Delicately take off the plastic cover from the controller. | |
| - | [* icon_caution] Do not completely remove the front cover just yet, as it is still attached to the motherboard via a white ribbon cable. |
| + | [* icon_note] There is an adhesive pad located in the center of each handle, it will require a bit of force to pry away the front cover, but be mindful of the attached ribbon cable. |
| + | [* icon_caution] Do not completely remove the front cover just yet(any more than 1 inch), as it is still attached to the motherboard via a white ribbon cable. |