Ga door naar hoofdinhoud

Wijzigingen aan stap #9

Bewerking door Philip Le Riche

Bewerking goedgekeurd door Philip Le Riche

Voor
Na
Ongewijzigd

Stap regels

-[title] Removing the optical assembly
+[title] Removing the optical assembly - 1
[* red] Remove a screw at the right hand end of the cover between the fan and the grill. (The screw at the other end was removed in removing the motherboard.)
[* black] Lift off this cover. Note that it's a snug fit. On refitting, ensure that the screw holes are correctly aligned with the pillars the screws scew into.
[* icon_caution] On reassembly, if you have removed the optical assembly and/or the fan, don't finally tighten the screws on these until you've refitted the fan/grill cover.