Ga door naar hoofdinhoud

Wijzigingen aan stap #9

Bewerking door Philip Le Riche

Bewerking goedgekeurd door Philip Le Riche

Voor
Na
Ongewijzigd

Stap regels

+[title] Removing the optical assembly
[* black] Remove a screw at the right hand end of the cover between the fan and the grill. (The screw at the other end was removed in removing the motherboard.)
[* black] Lift off this cover. Note that it's a snug fit. On refitting, ensure that the screw holes are correctly aligned with the pillars the screws scew into.
[* black] Lift the tape securing the red, green, blue and black wires to the battery so as to free those wires.
[* black] Remove 3 screws retaining the optical assembly. The entire assembly can now be lifted out.