Ga door naar hoofdinhoud

Wijzigingen aan stap #9

Bewerking door Philip Le Riche

Bewerking goedgekeurd door Philip Le Riche


Stap regels

+[title] Removing the optical assembly
+[* black] Remove a screw at the right hand end of the cover between the fan and the grill. (The screw at the other end was removed in removing the motherboard.)
+[* black] Lift off this cover. Note that it's a snug fit. On refitting, ensure that the screw holes are correctly aligned with the pillars the screws scew into.
+[* black] Lift the tape securing the red, green, blue and black wires to the battery so as to free those wires.
+[* black] Remove 3 screws retaining the optical assembly. The entire assembly can now be lifted out.