Ga door naar hoofdinhoud

Wijzigingen aan stap #6

Bewerking door Philip Le Riche

Bewerking goedgekeurd door Philip Le Riche

Voor
Na
Ongewijzigd

Stap regels

+[title] Disconnecting the video ribbon
[* black] Carefully peel back the copper foil covering the video connector until you can unmate it. Try not to tear the foil.
-[* icon_note] On reassembly, make sure the video connector is properly mated before pressing down the copper foil. You should feel a definite click as it mates. Ensure that both ends are mated.
+[* icon_caution] On reassembly, make sure the video connector is properly mated before pressing down the copper foil. You should feel a definite click as it mates. Ensure that both ends are mated.