Ga door naar hoofdinhoud

Wijzigingen aan stap #4

Bewerking door Philip Le Riche

Bewerking goedgekeurd door Philip Le Riche

Voor
Na
Ongewijzigd

Stap regels

-[* red] Before doing anything else, disconnect the battery connector, easing it with a pair of tweezers so as not to strain the wires.
+[title] Disconnecting connectors - 1
+[* red] Before doing anything else, release the battery connector, easing it with a pair of tweezers so as not to strain the wires.
[* orange] In the same way, release four connectors with red, green, blue and black wires
[* yellow] Similarly, release the fan connector, two connectors to the focus motor and an adjacent sensor board, and the two speaker connectors.
-[* icon_note] On reconnecting the ribbons, make sure they are fully inserted into their connectors before gently pushing down the locking tabs. This can be a little fiddly.