Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Apurva Patel

Bewerking goedgekeurd door Apurva Patel

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Using the spudger, gently push up the board from the pins it sits on.underneath it.
[* black]
Follow the board up and around the camera, gently unseating the board and cables.
[* blue] The speaker will still be connected to the board via two small power wires. Use the tweezers to pull and unplug the power connector from the main rear accessory board.
[* icon_note]
For best results, grip the tweezers as close to the plug as possible.
[* black] Using the spudger, gently push up the board from the pins it sits on.underneath it.
[* black]
Follow the board up and around the camera, gently unseating the board and cables.
[* blue] The speaker will still be connected to the board via two small power wires. Use the tweezers to pull and unplug the power connector from the main rear accessory board.
[* icon_note]
For best results, grip the tweezers as close to the plug as possible.