Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #2

Bewerking door Greg H

Bewerking goedgekeurd door Greg H

Voor
Na
Ongewijzigd

Stap regels

[* black] usingUsing the pry stickspudger, gently push up the board from the pins it sits on. Follow the board up and around the camera, gently unseating the board and cables.
[* blackblue] The speaker will still be connected to the board via two small power wires. Use the tweezers to pull and unplug the power connector from the main rear board. For best results, grip the tweezers as close to the plug as possible.
[* black] usingUsing the pry stickspudger, gently push up the board from the pins it sits on. Follow the board up and around the camera, gently unseating the board and cables.
[* blackblue] The speaker will still be connected to the board via two small power wires. Use the tweezers to pull and unplug the power connector from the main rear board. For best results, grip the tweezers as close to the plug as possible.

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Oude versie

Nieuwe versie