Wijzigingen in stap #1
Bewerken voor Apurva Patel —
Bewerking goedgekeurd door Apurva Patel
- Verwijderd
- Toegevoegd
- Ongewijzigd
Stap regels
| [* black] First it is necessary to remove the ribbon cable connecting the control board to the [green] rear |
| [* black] First it is necessary to remove the ribbon cable connecting the control board to the [green] rear |
| [* black] This is done by unsnapping the jawbone connector and gently pulling the cable out with tweezers or the spudger. |