Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Apurva Patel

Bewerking goedgekeurd door Apurva Patel

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] First it is necessary to remove the ribbon cable connecting the control board to the rear circuit board (green) on the camera.
[* black]
This is done by unsnapping the jawbone connector and gently pulling the cable out with tweezers or the pry stickspudger.
[* black] First it is necessary to remove the ribbon cable connecting the control board to the rear circuit board (green) on the camera.
[* black]
This is done by unsnapping the jawbone connector and gently pulling the cable out with tweezers or the pry stickspudger.