Wijzigingen aan stap #1
Stap regels
| [* icon_caution] Caution!!! High DC voltage up to 300V | |
| - | [* red] Peel tape with an isolated tool (plastic crowbar, plastic tweezers, toothpick etc). DO NOT USE metal tweezers. |
| + | [* red] Peel tape with an isolated tool (plastic crowbar, plastic [product|IF145-020|tweezers], toothpick etc). DO NOT USE metal tweezers. |
| [* light_blue] Use a 2-10kohm 5W resistor to discharge flash condenser, for atleast 10 seconds. | |
| [* light_blue] Check voltage across 2 points. Make sure it's below 5V DC |