Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door Allen

Bewerking goedgekeurd door Allen


Stap regels

+[title] Remove the inside plastic cover
[* black] With the Torx screws removed, the touchpad along with the circuit board and the door latch will flop open. I used a stool about 3 feet high to rest it on. The wires from inside the door are attached, so it will dangle in mid-air without the stool. The stool makes it easy to work on the replacement.
[* black] There is a black plastic cover over the latch mechanism, and a circuit board (on the right). There are 3 plastic tabs that hold the black cover in place. In the second picture, I have circled one on the left in Red. There are two on the right side. (the tab circled in Blue holds the latch mechanism, that's later in this procedure.)