Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Dave Farinelli

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* icon_caution] For precautionary purposes, we advise that you disconnect the battery connector from the logic board to avoid any electrical discharge. This step is ***optional*** and is not required.
[* black] Use the flat end of a spudger to lift the battery connector up out of its socket on the logic board.
+ [* black] Make sure ***''not''*** to use an electrical-conducting part, such as a screwdriver, to lift the battery connector out. By doing this, you risk shorting out the logic board.

Afbeelding 1

Verwijderd