Wijzigingen in stap #1

Bewerken voor Brandon Kirklen

Bewerking goedgekeurd door Brandon Kirklen

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Lay laptop on it's face and remove the two #1 Phillips screws in the back of the black plastic panel with a raised center.
[* icon_note] The screws will not separate from the plastic so back them out until there is a change in the resistance or you feel the screw "top out."
[* black] Gently lift the panel using the thumb slot on the side of the panel closest to you while the battery is oriented away.