Ga door naar hoofdinhoud

Wijzigingen aan stap #4

Bewerking door Arthur Shi

Bewerking goedgekeurd door Arthur Shi

Voor
Na
Ongewijzigd

Stap regels

[title] Install the SSD
-[* black] Set the SSD in the plastic tray and align the SSD ports to the enclosure socket.
-[* black] Carefully push the SSD into the enclosure socket to seat the ports.
+[* black] Set the SSD in the plastic tray and align the SSD ports to the tray socket.
+ [* icon_note] To prevent strain on the enclosure socket, lay the SSD as flat against the tray as possible.
+[* black] Carefully push the SSD into the tray socket to seat the ports.
[* black] Press the SSD's raised edge down into the plastic tray.
- [* icon_note] If the SSD's edge catches on the foam block, the SSD is not fully seated against the enclosure socket. Press the SSD against the socket some more to clear the foam block.
+ [* icon_note] If the SSD's edge catches on the foam block, the SSD is not fully seated against the tray socket. Press the SSD against the socket some more to clear the foam block.