Ga door naar hoofdinhoud

Wijzigingen aan stap #9

Bewerking door Carsten Frauenheim

Bewerking goedgekeurd door Carsten Frauenheim


Stap regels

-[title] Reassembly tip
[* icon_note] If your replacement power cord does not have quick disconnect plugs on the end of its wires, [|strip about half an inch of insulation|new_window=true] off of each wire to install new crimp connectors.
[* icon_reminder] Reassembly tip: This needs to be done ***after*** the cord is fed back into the cutting head, otherwise it won't fit.