Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #12

Bewerking door Andrew Optimus Goldheart

Bewerking goedgekeurd door Andrew Optimus Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Remove the following screws securing the logic board and MagSafe DC-In board to the upper case:
[* black] Remove the following screws securing the logic board and MagSafe DC-In board to the upper case:
[* red] Eight 3.3 mm T5 Torx screws
[* orange] One Phillips #00 screw
[* yellow] Two 3.1 mm T5 Torx screws
[* black] Remove two more screws, from the MagSafe DC-In board in the upper right corner (second image).
[* green] Two 3.4 mm T5 Torx screws