Skip to main content

Wijzigingen aan stap #12

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* black] Lift the battery as a whole up out of the upper case, and remove the battery.
[* icon_reminder] Before installing a new battery, remove all the old adhesive from the MacBook Pro's case.
[* black] With a little luck, you can slowly pull out each strip of adhesive with your fingers.
[* black] Otherwise, soak each section of adhesive with a bit of adhesive remover for 2-3 minutes, and then scrape it out with an opening pick or one of the other tools in your kit. This can take quite a bit of work, so be patient.
[* black] Mop up any remaining adhesive remover and give your MacBook Pro a few minutes to air dry.
[* icon_reminder] The replacement battery included in your iFixit kit comes with adhesive pre-installed. Test the battery's fit and alignment carefully before peeling off the film covering the adhesive, and then press each cell firmly into place. If any additional films/liners are present that weren't on your original battery, remove them now.
[* black] Calibrate your new battery before using it: allownewly installed battery: charge it to drain overnight, then charge100%, and keep charging it to 100%for at least 2 more hours. Unplug and drainuse it again untilnormally to drain the battery. When you see the low battery warning, save your MacBook Pro shuts down automatically. Charge it againwork, and usekeep your laptop on until it normallygoes to sleep due to low battery. Wait at least 5 hours, then charge your laptop uninterrupted to 100%.
[* black] Calibrate your new battery before using it: allownewly installed battery: charge it to drain overnight, then charge100%, and keep charging it to 100%for at least 2 more hours. Unplug and drainuse it again untilnormally to drain the battery. When you see the low battery warning, save your MacBook Pro shuts down automatically. Charge it againwork, and usekeep your laptop on until it normallygoes to sleep due to low battery. Wait at least 5 hours, then charge your laptop uninterrupted to 100%.
[* icon_caution] If you notice any unusual behavior or problems after installing your new battery, you may need to [https://support.apple.com/en-gb/HT201295|reset your MacBook Pro's SMC|new_window=true].