Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #3

Bewerking door Brandon Kirklen

Bewerking goedgekeurd door Brandon Kirklen

Voor
Na
Ongewijzigd

Stap regels

[* black] Carefully lift the fan and heat sink assembly.
[* black] Detach the fan power cable from the motherboard with your fingers by squeezing the sideswhite plastic connector and wiggling gently from side to side.
[* black] Detach the fan power cable from the motherboard with your fingers by squeezing the sideswhite plastic connector and wiggling gently from side to side.
[* violet] There will be a grey goop between the copper heat piping and the back of the processor, (indicated in pink). This is thermal paste and allows heat to flow properly.
[* icon_note] After removing the existing fan, be sure [* icon_reminder] Be sure to replace any missing thermal paste before reassembling your laptopwhen installing the new fan.
[* icon_note] After removing the existing fan, be sure [* icon_reminder] Be sure to replace any missing thermal paste before reassembling your laptopwhen installing the new fan.

Afbeelding 1

Oude versie

Nieuwe versie