Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #2

Bewerking door Brandon Kirklen

Bewerking goedgekeurd door Brandon Kirklen

Voor
Na
Ongewijzigd

Stap regels

[* black]red] Locate and remove the heat sink mounting screws using a #1 Phillips Screwdriver.
[* icon_note] These screws will be tight as they hold a critical component onto the processor. You may need to use a little extra elbow grease to remove them.
[* black]red] Locate and remove the heat sink mounting screws using a #1 Phillips Screwdriver.
[* icon_note] These screws will be tight as they hold a critical component onto the processor. You may need to use a little extra elbow grease to remove them.

Afbeelding 1

Oude versie

Nieuwe versie