Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door yoonth69

Bewerking goedgekeurd door Andrew Optimus Goldheart

Voor
Na
Ongewijzigd

Stap regels

[* black] Orient the Surface so the side with the charging port is facing you.
[* black] Use your finger to lift the tab and unplug the orange ribbon from the motherboard.
-[* red] Locate the two 3.57mm T5 Torx screws that hold the charger in place.
+[* red] Locate the two T4 Torx screws that hold the charger in place.
[* black] Unscrew the two screws.
[* black] Remove the charging port by sliding it out from the main board.