Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Kevin Hua

Bewerking goedgekeurd door Kevin Hua

Voor
Na
Ongewijzigd

Stap regels

-[* black] Orient the Surface so the side with the charger port is facing you.
-[* black] Use your finder to lift the tab and unplug the orange ribbon from the motherboard.
+[* black] Orient the Surface so the side with the charging port is facing you.
+[* black] Use your finger to lift the tab and unplug the orange ribbon from the motherboard.
[* red] Locate the two 3.57mm T5 Torx screws that hold the charger in place.
[* black] Unscrew the two screws.
[* black] Remove the charging port by sliding it out from the main board.