Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Michael Bianchini

Bewerking goedgekeurd door Michael Bianchini

Voor
Na
Ongewijzigd

Stap regels

[* black] Orient the Surface so the side with the charger port is facing you.
-[* black] There is an orange connector ribbon connected next to the charger port. Unplug the orange connector ribbon from the motherboard with your finger.
-[* red] Unscrew the two T5 Torx screws (3.57 mm) holding the charger in place.
+[* black] Use your finder to lift the tab and unplug the orange ribbon from the motherboard.
+[* red] Locate the two 3.57mm T5 Torx screws that hold the charger in place.
+[* black] Unscrew the two screws.
[* black] Remove the charging port by sliding it out from the main board.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie