Skip to main content

Wijzigingen aan stap #2

Bewerking door Walter Galan

Bewerking goedgekeurd door Walter Galan

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* black] Use the flat end of a spudger to pry up and disconnect the three antenna cable connectors from the AirPort board.
[* icon_reminder] For reassembly, note that theThe three cables are coded with black sleeves of different lengths. During reassembly:
[* blackred] Connect the long-sleeved cable to the center socket.
[* blackorange] The short-sleeved cable connects next to the screw.
[* blackyellow] The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.
[* black] Use the flat end of a spudger to pry up and disconnect the three antenna cable connectors from the AirPort board.
[* icon_reminder] For reassembly, note that theThe three cables are coded with black sleeves of different lengths. During reassembly:
[* blackred] Connect the long-sleeved cable to the center socket.
[* blackorange] The short-sleeved cable connects next to the screw.
[* blackyellow] The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.