| + | [title] Remove the blade |
|---|
| + | [* black] The blade will be accessible after separating the two halves. |
|---|
| + | [* icon_caution] ***The blade is sharp!*** Be careful not to get cut. |
|---|
| + | [* icon_note] Make sure to note the position the blade is installed in. The toothed edge should be facing away from you, with the longer slot on the left (assuming you’ve got the frame in the orientation as if it was installed in the printer with the cover closed). |
|---|
| + | [* icon_note] I can’t describe that any better. |
|---|
| + | [* icon_note] Make sure to route the wires coming from the cutter assembly through the groove in the left hinge of the print head cover when reinstalling the assembly into the printer. |
|---|