Epson TM-U300 Cutter Blade Replacement stap #2 geschiedenis

Wijzigingen aan stap #2

Bewerken voor Fifo F — 8 mrt. 2020

Bewerking goedgekeurd door Fifo F

	[title] Disassemble the cutter
	[* icon_caution] *Caution:* The screws are quite soft and easy to strip.
-	[* black] ~~Orient~~ the cutter so that the motor/gears face you.
+	[* black] Make sure the cutter assembly is oriented so that the motor/gears face you.
	[* blue] Remove the three screws holding the two halves in place.
-	[* icon_caution] ''Make sure not to damage the wires.''
-	[* black] De-route the wires coming from the motor, then separate the two halves.
+	[* black] Separate the two halves, making sure not to damage the wires.