| - | [* black] Open the print head cover. |
|---|
| - | [* blue] Remove the two Phillips screws securing the cutter/metal grounding arms to the printhead cover. |
|---|
| + | [* black] Open the print head/ribbon cartridge cover. |
|---|
| + | [* blue] Remove the two Phillips screws securing the cutter to the cover. |
|---|
| + | [* black] Set the metal brackets aside. |
|---|
| + | [* icon_caution] Do not pull on them forcibly – you risk tearing the grounding wires. |
|---|
| + | [* black] Remove the cutter assembly, being careful not to tear the cable coming from it. |
|---|
| + | [* blue] Disconnect the cable connecting the cutter to the printer. |
|---|