Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Dominik Schnabelrauch

Bewerking goedgekeurd door Dominik Schnabelrauch

Voor
Na
Ongewijzigd

Stap regels

[* black] Secure a suction handle to the bottom edge of the back cover, as close to the edge as possible.
[* black] Lift the back cover with the suction cuphandle to create a small gap between the cover and the frame.
[* black] Lift the back cover with the suction cuphandle to create a small gap between the cover and the frame.
[* black] Insert an opening pick into the gap.
[* icon_note] If you have trouble, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating.
[* black] Slide the opening pick to the bottom left corner.