Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Dominik Schnabelrauch

Bewerking goedgekeurd door Dominik Schnabelrauch

Voor
Na
Ongewijzigd

Stap regels

[* black] Secure a suction handle to the bottom edge of the back cover, as close to the edge as possible.
[* black] Lift the rear glass with the suction cup to create a small gap between the glass and the frame.
[*
black] Insert wisdom herean opening pick into the gap.
[* icon_note] If you have trouble, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating.
[* black] Slide the opening pick to the bottom right corner
.
[* black] Secure a suction handle to the bottom edge of the back cover, as close to the edge as possible.
[* black] Lift the rear glass with the suction cup to create a small gap between the glass and the frame.
[*
black] Insert wisdom herean opening pick into the gap.
[* icon_note] If you have trouble, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating.
[* black] Slide the opening pick to the bottom right corner
.