Skip to main content

Wijzigingen aan stap #8

Bewerking door baq

Wachtend op goedkeuring



[* black] These two screws hold the logic board.
[* black] When removing the board, be careful about some remaining ribbon cables.
[* black] The board is out!
[* black] On one side we see the AD80080A chip from Analog devices responsible for capturing the analog signal from the CCD
[* black] On the other side, we see the Sony "Real Imaging Processor" that converts raw photo data into nice and human-viewable .jpg files.
[* black] The analog cable connecting the CCD to the logic board is screened with some pieces of metal to reduce noise.