Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerking door Kevin Hua

Bewerking goedgekeurd door Kevin Hua

Voor
Na
Ongewijzigd

Stap regels

[* icon_caution] Once the back-plate is completely loose from the main system, do not pull the two apart.
-[* red] A ribbon connects the battery on the back-plate to the motherboard, therefore slowly lift the bottom of the back-plate up until you can see the ribbon. Use the spudger to push and remove the ribbon.
-[* orange] Separate the back-plate from the main system.
+[* red] A ribbon connects the battery on the back-plate to the motherboard, therefore slowly lift the bottom of the back-plate up until you can see the ribbon.
+[* black] Use the spudger to push and remove the ribbon.
+[* black] Separate the back-plate from the main system.