Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Kevin Hua

Bewerking goedgekeurd door Kevin Hua


Stap regels

[* icon_note] The battery is glued to the back cover but can be easily removed with a spudger
[* black] Gently slide the spudger underneath one side of the battery and work it back and forth around all sides until the battery comes off the back cover.
-[* icon_note] When reassembling the back cover to the motherboard, reinserting the ribbon cable with a spudger may prove difficult. In this case, gently use your hands to slide the cable end into the slot until they click into place.
+[* icon_note] When reassembly the back cover touch and test the adhesiveness before attaching the battery pack. Add double sided tape if needed.

Afbeelding 3