Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerking door Erin Beane

Bewerking goedgekeurd door Erin Beane


Stap regels

+[* red] To remove the back, start by removing small bezels, the small plastic snap-in pieces.
+[* orange] Remove the bezel covering the camera at the top of the tablet with a spudger. Be patient; it takes a little time to remove the bezels.
+[* yellow] Remove 17 T5 Torx screws. 10 are underneath the kickstand and 7 under the camera cover.
+[* icon_caution] Use caution removing the back cover because it is still connected to the motherboard by a ribbon cable. Use the spudger to safely detach the ribbon cable.