Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerking door Kevin Hua

Bewerking goedgekeurd door Kevin Hua

Voor
Na
Ongewijzigd

Stap regels

-[* red] To remove the back, start by removing the 10 T5 Torx screws located underneath the kickstand
-[* yellow] Now remove the small bezels, the small plastic snap-in pieces.
-[* orange] Remove the bezel covering the camera at the top of the tablet with a spudger. Be patient; it takes a little time to remove the bezels.
-[* green] Remove the 7 T5 Torx screws located under the camera bezel.
+[* red] Now you will remove the plastic case covering the camera. The plastic case has small bezels, plastic snap-in pieces.
+[* orange] Remove the plastic casing using a spudger. Be patient; you will have to work around the casing because there are several small bezels along the casing.
[* icon_caution] Use caution removing the back cover because it is still connected to the motherboard by a ribbon cable. Use the spudger to safely detach the ribbon cable.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Verwijderd