Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerking door Erin Beane

Bewerking goedgekeurd door Erin Beane


Stap regels

+[* red] With the stand open, we are ready to start. The stand is attached to the tablet with 2 Torx screws located on the left and right sides and a lever in the middle. Using a T5 Torx screwdriver, remove these screws.
+[* orange] With the screws removed, the stand is now detachable from the tablet.
+[* yellow] The lever can be released with some simple wiggling. The stand is now free.