Skip to main content

Wijzigingen aan deze stap

Bewerking door graymond6

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* black] Use plastic spudgeriPod opening tool to pry under the battery starting from where the removed circuit board was to jar the battery from the adhesive glue connecting it to the device. After getting it loose, use a metal spudger to continue seperating the battery from the adhesive. '''Be careful not to puncture the battery with the spudger'''.
[* black] Use plastic spudgeriPod opening tool to pry under the battery starting from where the removed circuit board was to jar the battery from the adhesive glue connecting it to the device. After getting it loose, use a metal spudger to continue seperating the battery from the adhesive. '''Be careful not to puncture the battery with the spudger'''.
[* black] After the battery is separated from the device, place it so the side of the device; the battery will still be connected by power cables