Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerking door graymond6

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Use spludgeriPod opening tool to lift off/flip up the black plastic flap where the ribbon connects to the circuit board. Slide out ribbon from circuit board and set circuit board aside. (Board will still be connected to the device via the copper cable and an auxiliary black cable)
[* black] Use spludgeriPod opening tool to lift off/flip up the black plastic flap where the ribbon connects to the circuit board. Slide out ribbon from circuit board and set circuit board aside. (Board will still be connected to the device via the copper cable and an auxiliary black cable)