Ga door naar hoofdinhoud

Wijzigingen in stap #8

Bewerken voor bmwalter

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Now that the side panels are removed, we can begin removing the camera's front bezel.
[*[* green] First, remove the two small Phillips screws on the lens side of the camera. These are identical to the screws we removed earlier
[*

[*
yellow] Using a spudger or small flat-blade screwdriver, gently lift the metal tab on the other side of the camera so that it clears the nub on the chassis.
[*

[*
black] Push the front bezel forward just enough so that the tab does not snap back into place.
[*[* green] First, remove the two small Phillips screws on the lens side of the camera. These are identical to the screws we removed earlier
[*

[*
yellow] Using a spudger or small flat-blade screwdriver, gently lift the metal tab on the other side of the camera so that it clears the nub on the chassis.
[*

[*
black] Push the front bezel forward just enough so that the tab does not snap back into place.