Ga door naar hoofdinhoud

Wijzigingen in stap #6

Bewerken voor bmwalter

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] After removing the nine screws in step five, the rear panel of the camera is ready to be removed.
[*[* black] Gently rock the rear panel until it feels loose
[*

[*
black] Starting from the bottom of the camera, lift the rear panel and hinge it towards the top of the camera. Once you reach a 45 degree angle, the top tabs should release and the rear panel will lift off freely.
[*[* black] Gently rock the rear panel until it feels loose
[*

[*
black] Starting from the bottom of the camera, lift the rear panel and hinge it towards the top of the camera. Once you reach a 45 degree angle, the top tabs should release and the rear panel will lift off freely.
[* black] Remove the camera's rear panel and set it aside. The LCD display and the control board are now exposed.