Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor bmwalter

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Before disassembling the camera, we'll need to remove the battery and memory card.
[*[* black] Turn the camera over and gently push the battery door toward the side.
[*

[*
black] The door is spring-loaded and will flip up.
[*

[*
black] Once the door is open, press the battery release and the battery will eject. The battery will then slide out easily.
[*

[*
black] If there is a Memory Stick installed, press it gently and it will eject from the slot.
[*[* black] Turn the camera over and gently push the battery door toward the side.
[*

[*
black] The door is spring-loaded and will flip up.
[*

[*
black] Once the door is open, press the battery release and the battery will eject. The battery will then slide out easily.
[*

[*
black] If there is a Memory Stick installed, press it gently and it will eject from the slot.
[* black] When the battery and memory card have been removed, close the battery door so it does not get damaged during disassembly.