Wijzigingen aan stap #7
Bewerken voor Ryan Winkler —
Bewerking goedgekeurd door Ryan Winkler
- Voor
- Na
- Ongewijzigd
Stap regels
[* icon_reminder] Be sure to remember where the spring is attached to prevent frustration putting the new spring on. | |
[* black] Locate the spring shown in the first picture. | |
- | [* red] After locating the spring, remove the top part of the spring first. This can be seen in the second picture |
- | [* red] Removing the spring can be done by pulling on until the top part of the spring is removed. |
- | [* orange] Next, find the bottom part of the spring. This can be found in the third picture. |
- | [* orange] Remove the bottom part of the spring similar to how the top part of the spring was removed. |
+ | [* red] After locating the spring, remove the top part of the spring first. The top part of the spring can be seen in the second picture. |
+ | [* orange] After locating the bottom part of the spring, this can be seen from the third picture, remove the bottom part of the spring. |