Ga door naar hoofdinhoud

Wijzigingen in stap #9

Bewerken voor JaosnT

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] These areAfter the LCD Ribbon Cables.mainboard has been removed
[* black] You will remove these by gently pulling up on either sidehave a look at some of the tiny brown connectors attching themour main components. The LCD and Prism connectoed to the Lens as well as some of the cooling Channels.
[* black] You can opt to remove this little
board from a fan shroud but i chose to leave it attached
[* black] I removed it to show you what it looks like anyway.
[* black] These areAfter the LCD Ribbon Cables.mainboard has been removed
[* black] You will remove these by gently pulling up on either sidehave a look at some of the tiny brown connectors attching themour main components. The LCD and Prism connectoed to the Lens as well as some of the cooling Channels.
[* black] You can opt to remove this little
board from a fan shroud but i chose to leave it attached
[* black] I removed it to show you what it looks like anyway.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Geen vorige afbeelding

Toegevoegd