Ga door naar hoofdinhoud

Wijzigingen aan stap #5

Bewerken voor Arthur Shi

Bewerking goedgekeurd door Arthur Shi

Voor
Na
Ongewijzigd

Stap regels

+[* icon_note] This step describes how to replace the capacitative button adhesives. You can skip to the next step if you are not replacing these adhesives.
+[* black] Peel off the*** white backing*** from one of the capacitative button adhesives.
+[* black] Carefully align the adhesive over the capacitative button.
+[* black] Use your finger to press the adhesive in place.
+[* black] If needed, repeat the procedure for the other capacitative button.
+[* black] Peel off the ***blue plastic liners*** from the adhesives.

Afbeelding 1

Geen vorige afbeelding

Toegevoegd

Afbeelding 2

Geen vorige afbeelding

Toegevoegd

Afbeelding 3

Geen vorige afbeelding

Toegevoegd