Wijzigingen aan stap #7
Bewerken voor Adam O'Camb —
Bewerking goedgekeurd door Adam O'Camb
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Line up the rear camera bezel with the rear camera and flash cutouts on the rear glass, then set it down on the adhesive. |
| + | [* black] Make sure the camera bezel is completely seated in the rear glass's camera cutout so that the bezel lays flat against the glass. |
| + | [* black] Apply even pressure to the bezel for 30 seconds to make sure the adhesive bonds properly. |
| + | [* black] When you are ready to install the rear glass, but before you seal the phone, peel off the black backing covering the camera glass. |