Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door David Patierno

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* red] Remove the single screw inserted through the piece of EMI tape near the bottom edge of the display.(It's the first of the two clutch cover screws)
+[* red] Remove the single screw inserted through the piece of EMI tape near the bottom edge of the display (it's the first of the two clutch cover screws).
[* black] Use the tip of a spudger to remove the small washer under the screw you just removed.