How To Replace the Battery on a Conair Trimmer (GMT15NCS) stap #4 geschiedenis

Wijzigingen aan stap #4

Bewerken voor Marty Rippens — 24 jun. 2019

Bewerking goedgekeurd door Marty Rippens

-	[* red] ~~Remove~~ the two ~~casing~~ screws ~~with a Phillips Head 000 screwdriver, turning it counterclockwise~~.
-	[* icon_note] Tilt trimmer so screws ~~will not fall~~ into casing.
+	[* red] Using a Phillips #000 screwdriver, remove the two screws inside the casing.
+	[* icon_note] Tilt the trimmer to prevent the screws from falling into the casing.