Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Andrew Optimus Goldheart

Bewerking goedgekeurd door Andrew Optimus Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Use a plastic opening tool to pry the LCD connector from its socket on the logic board.
[* icon_caution] Do not pry against the large IC next to the connector, or you may break it. PryGently pry from the side of the connector as shown.
[* icon_caution] Do not pry against the large IC next to the connector, or you may break it. PryGently pry from the side of the connector as shown.