Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Walter Galan

Bewerking goedgekeurd door Walter Galan

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Use a plastic opening tool to pry the LCD connector from its connectionsocket on the logic board.
[*

[*
icon_caution] Do not pry against the large IC next to the connector, or you may break it. Pry from the side of the connector as shown.
[* black] Use a plastic opening tool to pry the LCD connector from its connectionsocket on the logic board.
[*

[*
icon_caution] Do not pry against the large IC next to the connector, or you may break it. Pry from the side of the connector as shown.